i have ASRock X79 Extreme4
i7 3820 LGA2011
MSI GeForce GTX 660 Twin Frozr III
SanDisk 128GB SSD
Mountain Lion OSX 10.8.2
but my bios version is 2.70 can i use this DSDT???
I must precise I’m using the Marvell Controller for installing OS X, as the Intel ICH10R Controller is used by my Windows installation in RAID Mode, so OS X can’t see it 😦
I’ve tried some modified AHCIPort.kext to be able to see at least single drives connected to ICH10R in RAID mode, but no success so far.
Considering that ICH10R is not on this board what you are telling me is not very helpful. All the kexts that are listed in the DMG if installed properly will give full functionality. Hot swapping is a BIOS issue and not a mac issue. If you have Hot swapping enabled in the BIOs then they show as external as they should.
Overall you are not understanding the hardware you have and you need to read the user manual for the MB so you know what you have so you do not waste time thinking you have a issue when in reality its you that has the issue. Intel RAID is not supported by mac and you need to use Google to look this up as you can instantly find answers to your questions.
if apply:
-v npci=0×2000 cpus=1 GraphicsEnabler=No
I Always have an instan KP with unsupported CPU.
My CPU is a 3960x and when I have installed from usb I used:
SMcputype=1281 as you suggested in the guide.
hello rampagedev,
i had success trying with another method and then using ethernet kext that you adviced me (10.9 kext)
usb 3 is not working ( reset Ios if I connect a usb pen drive on usb 3 port)
audio card is not present, Extreme 9 has a pci e soundcard (game blaster) and I have not found any info to add in my hackintosh
again thank you
my problem withusb is that if i connect also an usb 2.0 pen drive on usb 3.0 port system reset itself after 2 second
in this case i have used a different kext from 10.9 kext
for soundcard, could you advice me a good usb soundard working out of the box?
thank you
Combo update to 10.8.5 is working
After update I have had to reinstall IONetworkingFamily.kext from 10.9
Rear USB 3.0 works out of box
Front USB 3.0 reset system
I have some minor cosmetic problem like 3.3 Ghz Processor Unknown under about my mac.
Old NVIDIA web drivers are not working for Nvidia Titan but integrated one are perfect
Thank you for your help
Yep, I mistook Intel PCH7 with ICH10R, my mistake, sorry.
I have several questions regarding DSDT, IB-E, and USB 3.0:
1. I’m currently successfully using Asrock Fatal1ty BIOS 1.6 DSDT with my 2.2 BIOS, I know that upgrading BIOS could cause my OS X system to break, but still I would like to upgrade to BIOS 2.6 to get IB-E compatibility, any advice on that?
2. Do I NEED IB-E to get CPU Power Management in 10.9, as Apple is releasing new MacPro’s using IB-E, or will SB-E be supported as well? (or SB-E PowerManagement usable at least using a patched AppleCPUPM.kext?)
Right now, I get two states, 1.2Ghz at idle and 3.6Ghz at load, and some kinda working sleep…
3. Regarding USB 3.0 and 10.8.4, if using USBXHCI.kext provided in the X79 .dmg file you provided for Asrock Fatal1ty, I get KP at boot, could this be related to me using 2.2 BIOS although DSDT has been made initially with 1.6 BIOS?
Big thanks and thumb up for your awesome work, thanks to you and your great help, I was able to get my Hackintosh fully running! 🙂
Any DMG FOR Asrock x79 Extreme 9 ? I have i7-3960x and I want to have Mavericks installed on it
I’ll do donation , please help me on this , I;ve user OSX on Mac for a long time but this is my first try on a Hackintosh machine
1. i couldn’t launch the installer with the org.chameleon.Boot.plist on your dmg, i added graphicsenabler y and pciroot 0, the mavericks installer then worked, i got everything installed just fine. now i’m stuck on the audio. i don’t quite understand your kexts, i went to asrock x79 extreme6 v1.0 > NVIDIA and tried the on board audio. how do i know which one i am supposed to choose here?
no sorry, i wasn’t clear, i didn’t install the files on the installer, i installed them on the installation, i only tried the boot loader on the installer, because if it doesn’t launch the installer, that would mean it also wont launch the installed osx right?
so now, again. same question, it says on steps:
2. Locate the appropriate folder for
your Motherboard Manufacture
3. Double click on the Kexts folder
4. Install the Boot Loader and Kexts
for your system (Tools folder locate
under Files folder)
how do i know which boot loader? asrock x79 extreme6 v1.0 > NVIDIA > on board audio
I have gotten everything running on an ASRock x79 Extreme4 except for the network using your DMG above. The system.log shows the message:
my_name_adlan_BCM5722D: Failed to register interrupt source
I rebuilt the cache and fixed permissions with Kext Helper but I still get the same message. Thoughts?
allenbyington
the asrock x79 extreme 4 has a broadcom bcm57781 network card
add what is between code and Endcode below to the end of PEX3 in your DSDT recompile and restart it should fix your problem. (all it does is trick your system into thinking it has a BCM5701 card)
It works on my x79 extreme6 which has the same network controller, No extra kexts needed in mavericks.
ASRock Extreme 11 here with not working audio:
Followed your instructions
4. Install the Boot Loader and Kexts for your system (Tools folder locate under Files folder) – okay
5. Locate the appropriate folder for your Motherboard Model – okay
6. Copy the SSDT.aml – okay
7. Drag the Extra Folder to the Macintosh HD Shortcut – okay
8. Authenticate using your password if necessary – okay
9. Double click on the Macintosh HD Shortcut – okay
10. Open the Extra Folder – okay
11. Now paste the SSDT in the Extra Folder – okay
12. Delete DSDT.aml if present – wasn’t present so nothing to do here
13. Restart your Computer – did it
Was running into trouble with LAN and Audio. I fixed LAN with patching the plugin kext in IONetwork but Audio seems to be to high for me 🙂
There is no audio hardware found at all but it works well on linux
Maybe someone could give me a hint.
Im not sure if i understand you correct.
Was i skipping/missing steps from your instructions?
If so please let me know 🙂
I only don’t posted step 1 to 3 because from my point of view they are completely clear and its just navigate to the essential folder 🙂
The ASRock Extreme 11 has the bcm57781 for networking (which is working now) and provide audio through the Creative Sound Core3D 7.1 CH so this seems to be not supported?
Anyway, very nice work thanks a lot, and i´ll of course donate here for further investigations
No audio support. Read me talks about installing the kexts… LAN might work with a kext I will upload onto the dmg this weekend. Old solution does not work under mavericks.
im on ASRock Extreme 11 here and got problems with LAN and Audio after installing. I figured out the LAN by patching the AppleBCM5701Ethernet.kext in …/IONetworkingFamily.kext/Contents/PlugIns/ but i cant figure out why the Audio stuff is not working. Its not a big problem because im normally using an RME PCIe card but would like to know why its not loaded like it should.
Could it be that they are not recognized correctly because the ASRock uses the lsisas2008 PCIe chip? Is there any driver solution i could try for the lsisas2008?
AHCI is on in BIOS ofc, otherwise the other drives would not get recognized.
Did a clean install of 10.9.1 used my hack install and installed the latest Chameleon-2.2svn-r2344.pkg. and your dmg. My exfat external does not show up plugged in 2.0 or 3.0 ports. My ntsf drive shows up but the files look as if its in 16 bit color or something and when i try to open dmg files an example it says WARNING flashplayer12-0 install input/output error. Happens on all my backed up osx files. I plug the drive in my mini and everything looks and opens perfectly.
Yes there are. I thought I could solve the issue doing my second drive with exfat but that drive is only seen by disk utility though, I can’t see or access it otherwise.
Is anyone else experiencing static after a few minutes of music playback on ALC898 using the appleHDA patcher referenced in the dmg? I’d rather get it working than use voodoo.
I wonder if you could help me.
I have an asrock x79 extreme 4 with an Intel i7 4820k, and a nvidia gtx 780.
I am using niresh distro in a pendrive, and whenever I boot from it, it stucks at the apple logo, and stops reading the pendrive, the last screen i’ve seen, booting with verbose, is this:
Maybe the 4820k is not compatible?
I will really appreciate any help.
Ok, I have copied the kernel and the extensions, now after booting up the installer with -v cpus=1 npci=0x2000 everything seems to work fine, but, after it loads everything, when I am supossed to get the language selection screen, y get a gray sceeen, I can see the mouse, and it moves very slowly.
What could it be?
Hopefully last question I make.
I have managed to install mavericks, but now, I have the same problem I had with booting the install disc, I have tried copying the kernel, and the extensions, and it doesn’t boot, I get a black screen in verbose mode, and stops reading the hard drive.
Thank you so much for the help you’ve been giving me.
Will you know when I have it installed, I can only boot from the USB install disk? booting directy from chameleon on hard drive won’t success, have copied the kernel, and used the same flags (npci=0x2000 GraphicsEnabler=No) both in the usb and the hard disk
As mentioned in other post I can only get my hackintosh running is I boot from the installer. I did some research and found culprit that is getting me stuck at system uptime in nanoseconds. it is most likely conflicts with the AppleIntelCPUManagement Kext. However, according to the DMG it says patch is not required for i7 4930K. Is there way you could help? or should I just install NullCPU since booting up from the installer is like having NullCPU. Correct me if I am wrong.
I use 79 asrock extreme 9 + intel 3930K. My speed is constant at 3.2 Hz that makes my temperature gets too high. How can I do to speed decrease when the CPU is idle and increase when it is working hard? Thank you
rampagedev
Pingback: All AsRock Mainstream x79 Motherboards DSDT (Beta) For Nvidia and AMD/ATI GPUS (Updated 9-18-2012) | rampagedev
i have ASRock X79 Extreme4
i7 3820 LGA2011
MSI GeForce GTX 660 Twin Frozr III
SanDisk 128GB SSD
Mountain Lion OSX 10.8.2
but my bios version is 2.70 can i use this DSDT???
I would need to update the DSDT for the latest BIOS.
so i can’t use for now ??
You could send me a DSDT extract and IOreg…
i sending you the DSDT &IOreg into your email adress
Hello, I have a ASRock X79 Extreme 3.
But i’m really new to this, can someone help me to install ML on my pc?
I can donate with PayPal if you want to.
Thanks!
Email me and we can go from there: thewho329@yahoo.com
Hello! I mailed you!
My audio is still not working can u help? Just for a donation..
The Extreme 3 right?
any news about asrock x79 extreme 4????
Un-tested but should work.
HI, can you help me with dsdt for asrock x79 extreme 3? Just for a donation
I will be uploading one this weekend.
When is coming the xtreme3?
This week.
When is coming the xtreme9?
Hello, please send me a DSDT for Extreme4. Thanks.
I do not own the board so how do you intend me to do so?
Mannnn, thanks for the Extreame 3!!!
and what about an audio?
sorry for my english. i’m from belarus)
It works with the AppleHDA on the DMG.
No problem.
I must precise I’m using the Marvell Controller for installing OS X, as the Intel ICH10R Controller is used by my Windows installation in RAID Mode, so OS X can’t see it 😦
I’ve tried some modified AHCIPort.kext to be able to see at least single drives connected to ICH10R in RAID mode, but no success so far.
Considering that ICH10R is not on this board what you are telling me is not very helpful. All the kexts that are listed in the DMG if installed properly will give full functionality. Hot swapping is a BIOS issue and not a mac issue. If you have Hot swapping enabled in the BIOs then they show as external as they should.
Overall you are not understanding the hardware you have and you need to read the user manual for the MB so you know what you have so you do not waste time thinking you have a issue when in reality its you that has the issue. Intel RAID is not supported by mac and you need to use Google to look this up as you can instantly find answers to your questions.
hello rampagedev ,
I have a ASRock X79 Extreme 9, could you help me?
Should be on the 10.9 DSDT. Check.
You mean from there:
https://rampagedev.wordpress.com/2013/08/08/mac-os-x-10-9-mavericks-unified-dmg-released/
?
Do you think is it possible to build a system with x79 extreme 9 motherboard and GTX Titan gfx and ML 10.8.4?
Thank you
Are you asking if it does before you buy or do you already own it?
Already own it
-v npci=0x2000 cpus=1 GraphicsEnabler=No
You may need to remove the native drivers to install.
Sorry rampagedev, but DSDT step is a post installation step?
I could install from myhack usb but when I reboot I have a KP with an unsupported cpu
Read the install guide for the boot flags…
if apply:
-v npci=0×2000 cpus=1 GraphicsEnabler=No
I Always have an instan KP with unsupported CPU.
My CPU is a 3960x and when I have installed from usb I used:
SMcputype=1281 as you suggested in the guide.
however thank you for your effort
So just adding that flag worked?
When is coming the xtreme4?
Email me a IOreg and DSDT. Thanks. Also list the BIOS version.
hello rampagedev,
i had success trying with another method and then using ethernet kext that you adviced me (10.9 kext)
usb 3 is not working ( reset Ios if I connect a usb pen drive on usb 3 port)
audio card is not present, Extreme 9 has a pci e soundcard (game blaster) and I have not found any info to add in my hackintosh
again thank you
Sound card will never work. Some USB 3.0 USB drives will not work with the kext.
my problem withusb is that if i connect also an usb 2.0 pen drive on usb 3.0 port system reset itself after 2 second
in this case i have used a different kext from 10.9 kext
for soundcard, could you advice me a good usb soundard working out of the box?
thank you
What brand 2.0 device?
Any USB sound card will work.
a mightydrive usb pen((4gb) and a 16gb pen drive no brand
kk
Combo update to 10.8.5 is working
After update I have had to reinstall IONetworkingFamily.kext from 10.9
Rear USB 3.0 works out of box
Front USB 3.0 reset system
I have some minor cosmetic problem like 3.3 Ghz Processor Unknown under about my mac.
Old NVIDIA web drivers are not working for Nvidia Titan but integrated one are perfect
Thank you for your help
Hi Rampage,
Yep, I mistook Intel PCH7 with ICH10R, my mistake, sorry.
I have several questions regarding DSDT, IB-E, and USB 3.0:
1. I’m currently successfully using Asrock Fatal1ty BIOS 1.6 DSDT with my 2.2 BIOS, I know that upgrading BIOS could cause my OS X system to break, but still I would like to upgrade to BIOS 2.6 to get IB-E compatibility, any advice on that?
2. Do I NEED IB-E to get CPU Power Management in 10.9, as Apple is releasing new MacPro’s using IB-E, or will SB-E be supported as well? (or SB-E PowerManagement usable at least using a patched AppleCPUPM.kext?)
Right now, I get two states, 1.2Ghz at idle and 3.6Ghz at load, and some kinda working sleep…
3. Regarding USB 3.0 and 10.8.4, if using USBXHCI.kext provided in the X79 .dmg file you provided for Asrock Fatal1ty, I get KP at boot, could this be related to me using 2.2 BIOS although DSDT has been made initially with 1.6 BIOS?
Big thanks and thumb up for your awesome work, thanks to you and your great help, I was able to get my Hackintosh fully running! 🙂
HI
Have just Emailed you DSDT and files for ASRock Extreme6 X79 with 2.41 Bios
Hi, is it possible to use a new 2690V2 (10 core 20 Threads) at this moment?
With the modded kernel should work.
Could you explain better?
Thank you
No.
No.
Hi Rampage,
Tried the DSDT inside the unified DMG for ASRock X79 Fatal1ty Pro, but no luck with my config, no boot nor with the i7 3820 or the i7 4930K.
I’m using 2.6 BIOS.
Do you want me to extract my current DSDT and send it to you?
Do I have to do something beside just running the script? (removing KEXT, etc…?)
Also, I have not been able to boot into mavericks using a generated SSDT for my former i7 3820.
Didn’t try with i7 4930K.
Any advice on that?
Thanks for the insanely good work ’till now, keep it up! ^^
Stop using a PM SSDT.
Send me a IOreg and DSDT.
Thanks!
I’m not currently using SSDT.
PM SSDT? What does PM stand for?
Here are DSDT extract and IOreg: https://www.dropbox.com/s/krpkmbdc0mx4ot4/X79_DSDT_ioReg.zip
Email the files to me.
PM=Power Management.
Yup, got that after having asked, feeling dumb now 😁
Email sent! thanks again! 😉
Any DMG FOR Asrock x79 Extreme 9 ? I have i7-3960x and I want to have Mavericks installed on it
I’ll do donation , please help me on this , I;ve user OSX on Mac for a long time but this is my first try on a Hackintosh machine
Email me:
thewho329@yahoo.com
And I can make a new SSDT solution for the board.
1. i couldn’t launch the installer with the org.chameleon.Boot.plist on your dmg, i added graphicsenabler y and pciroot 0, the mavericks installer then worked, i got everything installed just fine. now i’m stuck on the audio. i don’t quite understand your kexts, i went to asrock x79 extreme6 v1.0 > NVIDIA and tried the on board audio. how do i know which one i am supposed to choose here?
Your not following the install guide at all… I do not say to install my files on the installer…
no sorry, i wasn’t clear, i didn’t install the files on the installer, i installed them on the installation, i only tried the boot loader on the installer, because if it doesn’t launch the installer, that would mean it also wont launch the installed osx right?
so now, again. same question, it says on steps:
2. Locate the appropriate folder for
your Motherboard Manufacture
3. Double click on the Kexts folder
4. Install the Boot Loader and Kexts
for your system (Tools folder locate
under Files folder)
how do i know which boot loader? asrock x79 extreme6 v1.0 > NVIDIA > on board audio
does not work on my system.
Change change GE to Yes
i got it to boot, it works but my problem is the audio, i can not get it to work.
so, how do i get ioregs from my system, so i can send it to you?
Email clean dsdt and ioreg Files for ASROCK Extreme6 Bios 2.45
thewho329@yahoo.com
Can you please make a new SSDT solution for the board.
Will look into it.
I have gotten everything running on an ASRock x79 Extreme4 except for the network using your DMG above. The system.log shows the message:
my_name_adlan_BCM5722D: Failed to register interrupt source
I rebuilt the cache and fixed permissions with Kext Helper but I still get the same message. Thoughts?
Having issues with the kext in 10.9. No solution from what I have been able to find. If you find a working one let me know. Sorry.
allenbyington
the asrock x79 extreme 4 has a broadcom bcm57781 network card
add what is between code and Endcode below to the end of PEX3 in your DSDT recompile and restart it should fix your problem. (all it does is trick your system into thinking it has a BCM5701 card)
It works on my x79 extreme6 which has the same network controller, No extra kexts needed in mavericks.
Hope it Helps you to get network going.
code—-
Device (PXSX)
{
Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method
{
Store (Package (0x0C)
{
“AAPL, slot-name”,
Buffer (0x09)
{ “Built In” },
“Device-id”,
Unicode (“+”),
“device_type”,
Buffer (0x09)
{ “Ethernet” },
“Model”,
Buffer (0x12)
{ “Broadcom 57781” },
“device-id”,
Buffer (0x04)
{ 0xB4, 0x16, 0x00, 0x00 },
“vendor-id”,
Buffer (0x04)
{ 0xE4, 0x14, 0x00, 0x00 }
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}
}
—-Endcode
Will add to the next release. Thank you.
Your Welcome
ASRock Extreme 11 here with not working audio:
Followed your instructions
4. Install the Boot Loader and Kexts for your system (Tools folder locate under Files folder) – okay
5. Locate the appropriate folder for your Motherboard Model – okay
6. Copy the SSDT.aml – okay
7. Drag the Extra Folder to the Macintosh HD Shortcut – okay
8. Authenticate using your password if necessary – okay
9. Double click on the Macintosh HD Shortcut – okay
10. Open the Extra Folder – okay
11. Now paste the SSDT in the Extra Folder – okay
12. Delete DSDT.aml if present – wasn’t present so nothing to do here
13. Restart your Computer – did it
Was running into trouble with LAN and Audio. I fixed LAN with patching the plugin kext in IONetwork but Audio seems to be to high for me 🙂
There is no audio hardware found at all but it works well on linux
Maybe someone could give me a hint.
Never installed the drivers. Thanks for skipping steps.. also know your hardware and read what ALC are supported on the DMG.
Im not sure if i understand you correct.
Was i skipping/missing steps from your instructions?
If so please let me know 🙂
I only don’t posted step 1 to 3 because from my point of view they are completely clear and its just navigate to the essential folder 🙂
The ASRock Extreme 11 has the bcm57781 for networking (which is working now) and provide audio through the Creative Sound Core3D 7.1 CH so this seems to be not supported?
Anyway, very nice work thanks a lot, and i´ll of course donate here for further investigations
No audio support. Read me talks about installing the kexts… LAN might work with a kext I will upload onto the dmg this weekend. Old solution does not work under mavericks.
Hi there,
im on ASRock Extreme 11 here and got problems with LAN and Audio after installing. I figured out the LAN by patching the AppleBCM5701Ethernet.kext in …/IONetworkingFamily.kext/Contents/PlugIns/ but i cant figure out why the Audio stuff is not working. Its not a big problem because im normally using an RME PCIe card but would like to know why its not loaded like it should.
Any hints would be welcome.
Thanks in advice
Could it be that they are not recognized correctly because the ASRock uses the lsisas2008 PCIe chip? Is there any driver solution i could try for the lsisas2008?
AHCI is on in BIOS ofc, otherwise the other drives would not get recognized.
No. Your board has Intel ports and a SAS chip. Use the intel ports…
Did a clean install of 10.9.1 used my hack install and installed the latest Chameleon-2.2svn-r2344.pkg. and your dmg. My exfat external does not show up plugged in 2.0 or 3.0 ports. My ntsf drive shows up but the files look as if its in 16 bit color or something and when i try to open dmg files an example it says WARNING flashplayer12-0 install input/output error. Happens on all my backed up osx files. I plug the drive in my mini and everything looks and opens perfectly.
Any Windows format programs installed?
Yes there are. I thought I could solve the issue doing my second drive with exfat but that drive is only seen by disk utility though, I can’t see or access it otherwise.
Disable them as they can cause false positives like this.
Is anyone else experiencing static after a few minutes of music playback on ALC898 using the appleHDA patcher referenced in the dmg? I’d rather get it working than use voodoo.
More info.
I wonder if you could help me.
I have an asrock x79 extreme 4 with an Intel i7 4820k, and a nvidia gtx 780.
I am using niresh distro in a pendrive, and whenever I boot from it, it stucks at the apple logo, and stops reading the pendrive, the last screen i’ve seen, booting with verbose, is this:
Maybe the 4820k is not compatible?
I will really appreciate any help.
Use the modded kernel on the DMG.
thanks so much for answering, couldn’t get any help anywhere.
You mean the mach_kernel file?
Where should I put it?
Ok, I have copied the kernel and the extensions, now after booting up the installer with -v cpus=1 npci=0x2000 everything seems to work fine, but, after it loads everything, when I am supossed to get the language selection screen, y get a gray sceeen, I can see the mouse, and it moves very slowly.
What could it be?
GPU?
Ok, it could be then that the gtx 780 is not compatible?
I have read that it works out of the box.
Hopefully last question I make.
I have managed to install mavericks, but now, I have the same problem I had with booting the install disc, I have tried copying the kernel, and the extensions, and it doesn’t boot, I get a black screen in verbose mode, and stops reading the hard drive.
Thank you so much for the help you’ve been giving me.
Extensions?
You need to put the modded kernel on the SSD/HDD you installed to before first boot. Thats it. Follow the guide for the rest.
Thats not true.
Thank you again.
Ok, got it to boot, but when finishes booting, got a gray screen again, it doesn’t show any erros while booting in verbose.
GraphicEnabler=No
Add that to the string.
Will you know when I have it installed, I can only boot from the USB install disk? booting directy from chameleon on hard drive won’t success, have copied the kernel, and used the same flags (npci=0x2000 GraphicsEnabler=No) both in the usb and the hard disk
You need to follow the read me.
I have ASRock X79 Extreme3, E-5 2620, ATI 4890, 4gb
Problem with boot, tried -v cpus=1 GraphicsEnabler=NO npci=0×2000, get timeout.
Plz help!
-v -x cpus=1 npci=0x2000
Unsuccessfully, system uptime.
Post a pic.
http://postimg.org/image/rbh94sq0t/e5bd656b/
This is post install?
Yes
Add:
-f
To your boot string.
As mentioned in other post I can only get my hackintosh running is I boot from the installer. I did some research and found culprit that is getting me stuck at system uptime in nanoseconds. it is most likely conflicts with the AppleIntelCPUManagement Kext. However, according to the DMG it says patch is not required for i7 4930K. Is there way you could help? or should I just install NullCPU since booting up from the installer is like having NullCPU. Correct me if I am wrong.
hmm… Bios issue.
AsRock X79 Extreme 9 Motherboard DSDT which bios version can I use DMG for
These are SSDT’s…
I have a AsRock X79 Extreme 9 with BIOS v1.8 but I can’t disable CMS. Do you know if a newer Bios has this function
Thanks
Always use the latest BIOS version.
I use 79 asrock extreme 9 + intel 3930K. My speed is constant at 3.2 Hz that makes my temperature gets too high. How can I do to speed decrease when the CPU is idle and increase when it is working hard? Thank you
Did you look at the Power Management on the DMG…
Thanks for the answer, but when I install the Kext Power Management kernel panic occurs when I restart my cpu.