The link to the SVN in the first step above is not working….would you please give a link the SVN that Conti uses for Chameleon on myHack…Thx so much for your detailed guides…keep up the good work!
Hi rampagedev! I’m confused by this Chameleon Bootloader Install guide and the picture of the Chameleon’s Installer settings we can find into the X79 DMG. Should we install Chameleon with the method above or by the package?
Hi Rampagedev! I am following your guide and am having a little trouble. I cannot locate the trunk/SYM folder. Could you tell me the exact path to find it? It’s not in my users folder…
yup, im stupid… ok so I have followed your amazing guide up to step 13. where i type ./fdisk440 -f boot -u -y /dev/disk1s2, thats my drive, and it tells me that ./fdisk440 no suck file or directory… what am I doing wrong? thanks for your help!
Hay, I’m tiring to excicute this line in your guide – 20. Type in the following: ./fdisk440 -e /dev/disk0
But when I do it says resource busy, why is it saying that? I have not found out how to fix that error and would really appreciate some help. Thanks!
Any ideas…. I’ve been dealing with “kdp_poll: no debugger device” on the start up so I can only run my system thru the motherboard. The gfx card is a GTX 760, i bought it thinking my previous gfx had failed. I’ve been searching all over the web and I stumbled upon your site. I’m still running into issues with the trunk folder in Part 2. Thank you for your time and this site. I hope to get this bootloader on so I can follow your Nvidia retail Drivers for 10.9.2 post. Thanks again.
I have the same issue as the above user and I have done caps MAKE and it spits out the same error. I’ve done sudo on these commands as well. I have also deleted my TRUNK folder and retried the whole guide. I am on 10.9
When I restart my computer, I always am brought to a startup screen where the bootflags are entered – I have to press enter for the system to keep booting. Is there a way to have an automated countdown where enter will be pressed automatically? (I think Chimera has this – there is a 5 second countdown before automatically proceeding…) This would be very helpful for when troubleshooting graphics issues and I am using screen sharing to work on the main machine that is in another room. Thank you.
Hey, I need some help. I can’t get the boot0 error command fix to do anything.
dd if=boot1h of=/dev/identifier
It just says something about no such file or directory I think. I used the download and followed part 3. Can anybody help me?
rampagedev
Hi there!!
The link to the SVN in the first step above is not working….would you please give a link the SVN that Conti uses for Chameleon on myHack…Thx so much for your detailed guides…keep up the good work!
Working fine for me.
Pingback: New Nvidia Retail Driver | rampagedev
http://www.trieuvan.com/apache/subversion/subversion-1.7.8.tar.bz2 not found . . . .
Fixed
Pingback: x79 Speed Step Confirmed In OS X 10.9 | rampagedev
Pingback: Mac OS X 10.9 Mavericks | rampagedev
Hi rampagedev! I’m confused by this Chameleon Bootloader Install guide and the picture of the Chameleon’s Installer settings we can find into the X79 DMG. Should we install Chameleon with the method above or by the package?
Does not really matter. What ever you want. Unless you want the latest version you can use the package.
Hi Rampagedev! I am following your guide and am having a little trouble. I cannot locate the trunk/SYM folder. Could you tell me the exact path to find it? It’s not in my users folder…
Its Chameleon Trunk… the one you downloaded.
yup, im stupid… ok so I have followed your amazing guide up to step 13. where i type ./fdisk440 -f boot -u -y /dev/disk1s2, thats my drive, and it tells me that ./fdisk440 no suck file or directory… what am I doing wrong? thanks for your help!
Hay, I’m tiring to excicute this line in your guide – 20. Type in the following: ./fdisk440 -e /dev/disk0
But when I do it says resource busy, why is it saying that? I have not found out how to fix that error and would really appreciate some help. Thanks!
Hello rampagedev, I am getting this error at the end of Part 2 in Terminal.
================= Making all in libsaio =================
[MKDIR] /Users/XAV/trunk/obj/i386/libsaio
[CC] table.c
[AS] asm.s
[AS] bios.s
[CC] biosfn.c
[CC] disk.c
[CC] sys.c
[CC] cache.c
[CC] bootstruct.c
[CC] stringTable.c
stringTable.c:43:1: error: unused function ‘keyncmp’ [-Werror,-Wunused-function]
keyncmp(const char *str, const char *key, int n)
^
1 error generated.
make[3]: *** [/Users/XAV/trunk/obj/i386/libsaio/stringTable.o] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
VEPs-Mac-Pro:trunk XAV$
Any ideas…. I’ve been dealing with “kdp_poll: no debugger device” on the start up so I can only run my system thru the motherboard. The gfx card is a GTX 760, i bought it thinking my previous gfx had failed. I’ve been searching all over the web and I stumbled upon your site. I’m still running into issues with the trunk folder in Part 2. Thank you for your time and this site. I hope to get this bootloader on so I can follow your Nvidia retail Drivers for 10.9.2 post. Thanks again.
Xav
Use all caps for make…
I have the same issue as the above user and I have done caps MAKE and it spits out the same error. I’ve done sudo on these commands as well. I have also deleted my TRUNK folder and retried the whole guide. I am on 10.9
stringTable.c:43:1: error: unused function ‘keyncmp’ [-Werror,-Wunused-function]
keyncmp(const char *str, const char *key, int n)
^
1 error generated.
make[3]: *** [/Users/tony/trunk/obj/i386/libsaio/stringTable.o] Error 1
make[2]: *** [all-recursive] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
Report it to the error section on the boot loader site.
When I restart my computer, I always am brought to a startup screen where the bootflags are entered – I have to press enter for the system to keep booting. Is there a way to have an automated countdown where enter will be pressed automatically? (I think Chimera has this – there is a 5 second countdown before automatically proceeding…) This would be very helpful for when troubleshooting graphics issues and I am using screen sharing to work on the main machine that is in another room. Thank you.
See Clover docs. You have to add your HDD name to the config list.
Hey, I need some help. I can’t get the boot0 error command fix to do anything.
dd if=boot1h of=/dev/identifier
It just says something about no such file or directory I think. I used the download and followed part 3. Can anybody help me?
identifier is the disk identifier…